Proceedings of International Conference on Applied Innovation in IT  ·  2023/03/09  ·  Vol. 11  ·  Issue 1  ·  pp. 193–198
Modeling of Vegetable Oil Miscellaneous Drive Process in Final Distiller Spray Zone
Abduhoshim Qadirov, Ulugbek Mannanov, Anvar Khamdamov, Absalom Xudayberdiyev and Nematilla Kurbanov
📄 Download PDF DOI: 10.25673/101937
Abstract
This work discusses the kinetics of the separation process of a solution consisting of vegetable oil and a low-boiling hydrocarbon solvent in a distillation process. The efficiency of the distiller is affected by capital costs, energy costs, and quality characteristics of the resulting oil. The mass transfer rate depends on the nature of the phase equilibrium, mass transfer coefficient, and contact area between the phases. The issues of mathematical modeling of heat and substance exchange processes going in the spraying zone of the final distillation device of vegetable oil are presented. The influence of various factors such as initial temperature and concentration of the feed liquid, vacuum pressure, and particle diameter on the distillation process is also discussed. The process of scattering liquid in a channel sprayer is given to two zones A and B, that is, mathematical and computer models of the processes of heat and substance exchange, which are carried out by turning the liquid into a drop, and the results of the computer model are analysed.
Keywords
Steam Temperature Distiller Missella Extraction Oil Nozzle Drop Liquid Pressure Time.
References
  1. R. W. Faidley and R. L. Panton, “Measurement of liquid jet instability induced by surface tension variations,” Exp. Therm. Fluid Sci., vol. 3, pp. 383-387, 1990.
  2. E. B. Saitov and T. B. Sodiqov, “Modeling an Autonomous Photovoltaic System in the Matlab Simulink Software Environment,” in AIP Conference Proceedings, 2022, vol. 2432, p. 020022.
  3. E. B. Saitov, Sh. Kodirov, B. M. Kamanov, N. Imomkulov, and I. Kudenov, “Increasing the Efficiency of Autonomous Solar Photovoltaic Installations for Power Supply of Agricultural Consumers,” in AIP Conference Proceedings, 2022, vol. 2432, p. 040036.
  4. F. Zikrillayev, E. B. Saitov, J. B. Toshov, B. K. Ilyasov, and M. B. Zubaydullayev, “A Software Package for Determining the Optimal Composition and Parameters of a Combined Autonomous Power Supply System Based on Renewable Energy Sources,” in AIP Conference Proceedings, 2022, vol. 2432, p. 020021.
  5. N. F. Zikrillayev, K. C. Ayupov, S. A. Valiyev, S. B. Shergoziyev, and G. X. Mavlonov, “Functional possibilities of strong compensated leggier Si with the different deep energetic levels impurities in electronics,” J. Adv. Res. Dyn. Control Syst., vol. 12, no. 7, Special Issue, pp. 2751–2758, 2020.
  6. A. M. Khamdamov, S. H. Sultonov, and S. A. Bozorov, “The main results of the study of the processes of deodorization of vegetable oils using wooden nozzles,” J. Pharm. Negat. Results, vol. 13, no. S06, pp. 3844-3851, Dec. 2022, doi: 10.47750/pnr.2022.13.S06.512.
  7. N. R. Yusupbekov, H. S. Nurmuhamedov, and S. G. Zokirov, “Kimyoviy texnologiya asosiy jarayon va qurilmalari,” T.: Fan va texnologiya, 2015, pp. 1-848.
  8. W. A. Sirignano and C. Mehring, “Review of theory of distortion and disintegration of liquid streams,” Prog. Energy Combust. Sci., vol. 26, pp. 609-655, 2000.
  9. A. G. Laptiev, M. I. Farakhov, and N. G. Mineev, “Osnovy rascheta i modernizaciya teplomassoobmennyh ustanovok v neftehimii,” Kazan, Russia: Kazan. gos. energet. un-t, 2010, 574 p.
  10. Y. Qodirov and M. Raximov, “Yoglarni qayta ishlash texnologiyasi,” Darslik: “Iqtisod-Moliya”, 2013, pp. 300.
  11. S.V. Butova, I.A. Sorokina, N.V. Korolkova, and M.N. Shaxova, “Rascheti oborudovaniya maslojirovoy promыshlennosti: uchebnoye posobiye”, Voronej: FGBOU VO Voronejskiy GAU, 2017, pp. 151.
  12. G.F. Vasileva, V191 Dezodoratsiya masel i jirov (Predisloviye d.t.n. N. S .Arutyunyana), SPb: GIORD, 2000, pp. 192.
  13. A.M. Hamdamov and D.A. Igamberdieva, “Matematicheskoe modelirovanie ravnovesnogo sostoyaniya ekstrakcionnogo benzina i zhirnyh kislot,” Science Time, no. 4 (40), 2017, pp. 209-213.
  14. A.M. Hamdamov and D.A. Igamberdieva, “Mathematical modeling of the process of final distillation of a multi-stage rotary-disk apparatus,” Scientific Bulletin of Namangan State University, vol. 2, no. 3, pp. 128-135, 2020.
  15. A.M. Khamdamov, O.K. Askarova, O.A. Mansurov, and S.H. Sultonov, “Simulation of a Multistage Distillation Process in a Rotary Disc Device,” Annals of the Romanian Society for Cell Biology, Apr. 2021, pp. 5939-5948.
  16. D.R. Chen, D.Y. H. Pui, and S.L. Kaufman, "Electrospraying of conduction liquids for monodisperse aerosol generation in 4 nm to 1,8 μm diameter range," J. Aerosol Sci., vol. 26, pp. 963-977, 1995.
  17. V. Chernyak, “The kinetic theory of droplet evaporation,” Journal of Aerosol Science, vol. 26, no. 6, pp. 873-885, Sept. 1995.

Proceedings of the International Conference on Applied Innovations in IT by Anhalt University of Applied Sciences is licensed under CC BY-SA 4.0  ·  This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

ICAIIT 2026
International Conference on Applied Innovation in IT
Navigation
Publisher
ISSN2199-8876
Publisher Edition Hochschule Anhalt
Location Anhalt University of Applied Sciences
Email leiterin.hsb@hs-anhalt.de
Phone +49 (0) 3496 67 5611
Address Building 01, Room 425
Bernburger Str. 55
D-06366 Köthen, Germany
Open Access License
CC BY-SA 4.0

All works are licensed under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0), unless otherwise noted.

Published by ICAIIT in cooperation with Anhalt University of Applied Sciences.

© 2026 ICAIIT — International Conference on Applied Innovations in IT. Anhalt University of Applied Sciences, Köthen, Germany.
Visitors: site traffic counter